Friday, May 27, 2016

Digital Signature Issue in Mozilla ThunderBird

When I try to send a digitally signed message I get a pop-up saying that "Unable to sign message- check that certificates specified in the Mails and Newgsroups Account Settings for this mail account are valid and trusted".

I have install new p12 file into Mozilla Thunder Bird.
Edit → Account Settings → Security → Certificate → View Certificate
Under the “ Your Certificate” tab you need to import the p12 file. Then When I'm try to send emails by digitally signing I got the above error.


Then in the same path open “Authorities” tab and search for the Root CA of the certificate issuer. Point out that Root CA and click “Edit Trust” and make Root CA trusted. Then you will be able to send the email by digitally sign.

Tuesday, April 19, 2016

/usr/local/apache2/bin/apachectl: 95: /usr/local/apache2/bin/apachectl: lynx: not found

I have built APACHE 2.4 version from the scratch. Therefore it does not have init scripts to control the apache service. It use apachectl command which is located in /usr/local/apache2/bin directory.
Apachectl command support for start, stop and status arguments.

But when I tried to check the status of the apache service, it produce the above error.

Root cause: As you can see in the error message lynx command is not found in the server. The reason is when apachectl check the status it uses lynx command and issue the below command.
lynx http://localhost

To rectify this issue you need to install the lynx command. I have played with the debian version. So the command is apt-get install lynx

Tuesday, March 29, 2016

Zimbra Error Queue report unavailable – mail system is down

Logged into the server and then checked the mail log and it continuously generating “Queue report unavailable – mail system is down”.
I have run the following to find out the root cause.
  1. Run the “df -hT” command to check the Hard disk space.
  2. top” command to check the memory usage of the system.
  3. Then run the /etc/init.d/zimbra status, it shows all the services running. No issues at all.
  4. Checked the “netstat -ant | grep 25” zimbra listening on the port as well.
So far other than the maillog error it does not give any error message. As usual, google the error message and found solution for the issue.
It's issue with the postfix master.pid file. To rectify it, need to remove the master.pid file and restart zimbra service again. Issue below commands.
  1. find / -name master.pid
  2. cd /opt/zimbra/data/postfix/spool/pid/
  3. mv master.pid master.pidori
  4. then /etc/init.d/zimbra restart
This will solve the issue.


Monday, March 28, 2016

Suddenly Proxy stop answering to Users TCP/MISS 503 error


Error : Users are experiencing web site surfing issues with the proxy. They can not surf any website and in the access.log file all the requests have logged as TCP/MISS 503 error message.

To rectify the issue try with the below workarounds.
  1. Clear the squid cache folder located in /var/spool/squid
  2. Rearrange the ACLs with new configuration.
But issue remains. Then I have given full access to all the users to confirm the issue. Once users get the full access they able to access the Internet. With that it's confirmed that issue is with the proxy.

While monitoring the access.log it found that users were able to access the sites with the IP address. Then able to figure out the root cause is that proxy failed to resolve Hostname to IP address.

Solution :
checked the squid configuration file. /etc/squid/squid.conf
It has three name servers configured.
I have changed the name servers to google DNS, then restart the proxy server. Finally it fixed and users able to surf Internet through proxy.

Thursday, February 18, 2016

Un-install Zimbra from CentOS system

I have gone through a Zimbra installation on CentOS 6.7 Operating System and made a mistake with the installation. Therefore, it has a requirement of reconfiguration of Zimbra. As far as I have understood, if there are any configured files for Zimbra it could not perform reconfiguration.

The solution I have found was completely remove the Zimbra installation from the CentOS and install it from the beginning.

As root:
Run the commands:
su – zimbra
zmcontrol stop
exit
Then Login as Root user to the system and perform below command.

Run the command:
ps -ef | grep -i zimbra
If you see running processes
Kill any lingering processes:
kill -9 <pid>

Run the command:
df
If you see "amavisd"
with the output then you need to unmount the amavisd folder. But most cases, it does not have seperate mount point. If tha case then skip this step.
run command:
umount /opt/zimbra/amavisd<-new-blah>/tmp

cd /install_dir/zcs/

Run the command:
./install.sh -u

Run the following commands to complete the unistall:
rm -rf /opt/zimbra
rm -rf /var/log/*zimbra*
rm -rf /tmp/*zimbra*
rm -rf /tmp/hsperfdata*
rm -rf /tmp/install.*
rm -rf /tmp/*swatch*
rm -rf /tmp/log*
Ensure that you removed ALL the files owned by the user zimbra and that contain the name "zimbra" in:
/var/log/
/tmp/
Even after deleting if there are any folder remain delete it.
Run the following commands to delete the users and groups:
userdel zimbra
userdel postfix
groupdel zimbra
groupdel postfix


Remove the Zimbra logging lines below from /etc/
rsyslog.conf:
local0.* -/var/log/zimbra.log
auth.* -/var/log/zimbra.log
mail.* -/var/log/zimbra.log
But most probably those parameters are not there. Again if that is the case skip this step.

Remove logrotate config file for Zimbra (CentOS, RHEL)
rm -f /etc/logrotate.d/zimbra

Remove the Zimbra lines below from /etc/prelink.conf (CentOS, RHEL)
# added for Zimbra
-l /opt/zimbra/lib
-l /opt/zimbra/sleepycat/lib
-l /opt/zimbra/openldap/lib
-l /opt/zimbra/cyrus-sasl/lib
-l /opt/zimbra/mysql/lib

Remove Zimbra entries in /etc/rc* (CentOS, RHEL)
chkconfig --del zimbra
With this you are done, you can confirm this with “rpm -q zimbra”

Monday, January 25, 2016

VMware Virtual Center Server Stopped

Root Cause
While I go through the Event viewer I have found several error logs in the System and Application. System Log have Event ID 7024 which is related to VMware VCenter Server.
The VMware VirtualCenter Server service terminated with service-specific error the system cannot find the file specified.”

Then checked the application log since above error is not obvious and cloud not imagine exact reason for the error.
By looking at the Application log it’s having lot of errors with Event ID 1105 and below is the detail of the error event

Log Name: Application
Source: MSSQL$SQLEXP_VIM
Date: 01/25/2016 14:30:48
Event ID: 1105
Task Category: Server
Level: Error
Keywords: Classic
User: SYSTEM
Description:
Could not allocate space for object ‘dbo.VPX_HOST_VM_CONFIG_OPTION’.'PK_VPX_HOST_VM_CONFIG_OPTION’ in database ‘VIM_VCDB’ because the ‘PRIMARY’ filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
I have gone through database and the size of the database is 9.99GB. Microsoft SQL Server 2008 R2 is only supporting up to 10 GB. This is the root cause for the issue.
Solution
Running the following from the commands to shrink the database.
cd \
cd Program Files\Microsoft SQL Server\100\Tools\Binn\
OSQL.EXE -S localhost\VIM_ SQLEXP -E
Then follow the below, update value with your desired time to keep items for inside the DB.
1> use VIM_VCDB
2> go
1> update vpx_parameter set value=’30’ where name=’event.maxAge’
2> update vpx_parameter set value=’30’ where name=’task.maxAge’
3> update vpx_parameter set value=’true’ where name=’event.maxAgeEnabled’
4> update vpx_parameter set value=’true’ where name=’task.maxAgeEnabled’
5> go
(1 row affected)
(1 row affected)
(1 row affected)
(1 row affected)
1> exec cleanup_events_tasks_proc
2> go
1> dbcc shrinkdatabase (“VIM_VCDB”)
2> go
1> quit

Then start the VMware Virtual Center Server service.